WOLFSOFT INTERN

Kategorie: Lightgun

AimTrak for Arcade Lightgun

  • AimTrak for Beretta gun

    I like Beretta Guns, but until now there was no way to use them with Arcade Cabs.

    A month ago ultimarc give us a new product called AimTrak. It is like the Wii Remote with a Camera inside and a Sensorbar at the top of screen.

    We have some good old BerettaGuns left for XBOX1 and I ripped of original stuff to make them working with AimTrak and my Arcade Cab.

    The procedure tooks 3-4h of work *puh*

    Here you can find the gun

    Here you can find the AimTrak

    Little Video

    I tried it at my arcade cabinet with a crt put the senorsar in top of the screen and it works absolutly *great* Fun ONLY

    Here are some pictures of the progress:

    aimtrak_teaser640x400

    good old Thrustmaster Beretta Gun
    good old Thrustmaster Beretta Gun
    "Sensorbar"
    "Sensorbar"

    The Sensorbar only need 5V powersupply. So it is connected to a USB Port for powering.

    First 2 screws
    First 2 screws

    Opening Part is easy

    First 2 screws
    First 2 screws
    First 2 screws
    First 2 screws
    First 2 screws
    First 2 screws

    good position of the B-Button downside

    First 2 screws
    First 2 screws
    First 2 screws
    First 2 screws
    First 2 screws
    First 2 screws
    First 2 screws
    First 2 screws
    First 2 screws
    First 2 screws

    original photoeye

    aimtrak11

    for fitting into the beretta it was neccacary to reduce the size of the AimTrak

    comparing original size and reduced / Wires
    comparing original size and reduced / Wires

    And do some rewiring

    Wiring including 5 Buttons.

    Fire, Reload B, Reload A, back, and start
    The original AimTrak can use 2 Buttons with a connector.

    There are 5 more if you can solder

    I used this device to cut off the pcb
    I used this device to cut off the pcb
    rewiring buttons a,b @ side of gun
    rewiring buttons a,b @ side of gun

    Wiring Button A, B

    First 2 screws
    First 2 screws

    Wiring back and Start for use of Coins, and Start/Continue

    First 2 screws
    First 2 screws
    First 2 screws
    First 2 screws

    I make use of a 3m USB Cable and solderd it directly to the AimTrak

    First 2 screws
    First 2 screws

    Here we go

    First 2 screws
    First 2 screws

    In front you can see the new „eye“