Today I take a blue Led 5mm with 39Ohm Resistor and connected it parallel to the Merlin Magic Lamp.
It is flickering to much, so I will add a Capacity to reduce it.
First I use some head shrink tube to reduce the angel of radiation and connect it to the merlin magic lamp (here you have to check the polarity).
way of the wire…
I am using double sided adhesive for position the led
Soldering:
Video:
Today I got the Capatult Led mod from pimpmypin.com
The documentation told me to remove the catapult ramp.
Oh no, so much work … There must be an easier way..
I opened the pinball like this and put in the led pcb:
The tricky part is the screw on the left site…
I used bothsided adhesive to get the screw at the right position:
and screwed this way
Hi Folks,
today I have done some easy mods for my mm.
I started with a Merlin and replaced the original fire with a magic ball 🙂
Here you can see some pictures (easy going…)
With the help of some hot glue the magic ball fits.
